It's Electrifying
To Add/Install An Outlet You Must Have...
Replacing An Old Outlet in 10 Easy Steps
Installing or Replacing a Circuit Breaker
Installing or Replacing a Circuit Breaker
Before installing a circuit breaker, turn off the main power breaker to shut down power to the entire house.
Unscrew the faceplate to remove the gray circuit breaker panel. Once you have removed the cover then you can disconnect the wire from the faulty breaker and pull it out of the way. Now, carefully pry the defective circuit breaker out of its position. Take note of how the breaker fits in the panel and locks into position so that you can put the new circuit breaker in correctly. Upside down and sideways positions typically do not work. Next, insert the new circuit breaker.
While you have the circuit panel open, check the other branch circuits to make sure they are properly in place and tighten any loose parts. Put the panel cover back on and make sure all the branch circuit switches are in the “off” position. Proceed to turn on the main circuit breaker and then flip on each individual branch breaker separately. Test the circuits to make sure they are working properly and stay set.
It is always a good idea to have each circuit breaker clearly labeled. This prevents confusion and frustration in the event that one needs to be reset or replaced. You can begin labeling the circuits by turning them off and on to see which appliance it is connected to. Circuit breakers consist of the main power supply to your home as well as individual circuits for appliances within your home.
Typically circuit breakers do not need to be replaced unless they are worn out, broken or not functioning properly. You will need to replace a circuit breaker if it is hot to the touch, has a burning smell or you can see visual damage such as black or burned material or frayed wires.