It's Electrifying
To Add/Install An Outlet You Must Have...
Replacing An Old Outlet in 10 Easy Steps
Installing or Replacing a Circuit Breaker
Safety First
- Before you do any electrical work on a circuit, make sure the power is off. Turn off the breaker (or pull/unscrew the correct fuse) to the circuit you'll be working on.
- Post a sign on the service panel so nobody tries to restore power while you're working on the circuits.
- Double-check the circuit with a circuit tester before you touch it to make sure the correct breaker has been tripped.
- Labeling or drawing a diagram before unhooking wires will take any guesswork out of how to reconnect them.
- Wear shoes with non-conductive soles, use tools with rubber grips and don't stand in water to avoid a potentially dangerous shock.
- Finally, never push yourself to finish a wiring job. Take a break and think about what needs to be done. If you're still not sure, don't take chances -- contact a professional.
Getting Started
Electrical work can be intimidating because it can be dangerous, and some accidents can cause serious injury. If you're not confident in your ability to do electrical work, consider hiring someone to do the work. Your project may require a building permit and inspections. It's your responsibility to get the proper permit and schedule inspection times.
Warning: doing work without a required permit is illegal! It may also invalidate your homeowner's insurance.
When you're doing a remodeling job, wiring may be old and outdated. If you're tearing out walls enough to expose wiring, it should be brought up to code. Obviously, that involves more work and money for materials like cable, boxes, switches, staples, but you'll feel much better having newer, safer cable in the house.